Sender/Sending card/board/panel Linsn TS802D for led display screen SYNC controller system
TS802 is a sending card for full color led screen, and supports single and double color led screen as well. One card can support 1310720 pixels; supports 4032 pixels in width at most; and 2048 pixels at most in height.
It has below features:
1) One DVI video signal input;
2) One Audio signal input;
3) Sending card is set by USB; can be cascaded to drive a larger screen, up to 4 cards cascaded;
4) Two network outputs; single port maximum support 655360 pixels;
5) Supports adjusting brightness manually (require working with outer box) ;three scales can be set:16-grade, 32-grade and 64-grade;
6) Supports 60Hz and 30Hz output mode;
Capability
| 60Hz mode(using two ports) | 30Hz mode(using two ports) |
| 2048 × 640 | 4032 × 512 |
| 1920 × 672 | 3840 × 544 |
| 1792 × 720 | 3584 × 576 |
| 1600 × 800 | 3392 × 608 |
| 1472 × 880 | 3200 × 640 |
| 1344 × 960 | 3072 × 672 |
| 1280 × 1024 | 2880 × 704 |
| 1024 ×1280(require supporting by graphics card) | 2560 × 800 |
| 832 ×1280( require supporting by graphics card | 2368 ×864 |
| 640 ×1280 ( require supporting by graphics card ) | 2048× 1024 |
Note,
1. The capabilities above need to be supported by the capability of the graphics card (or video processor); for ultra-long or ultra-high resolution, please use GTX1050(one of the graphics card type) or use other graphics card with same or higher configuration)
2. The output of one port of TS802 cannot exceed 655360 pixels (which is half of 1310720 pixels).
